ED-8000 can support two modes: analog mode (No ID) and digital mode(RFID). In the analog mode, ED-8000 can detect all electronic markers with standard frequency (gas 83 khz, telcom 101.4khz, sanitary 121.6 kHz, water 145.7khz, power 169.8khz/134khz, general 66.35/133.3khz, TV 77khz), for example, The Non-ID markers manufactured by either EEDENG technology or 3M can be detected by ed-8000 in analog mode. In the digital mode, ED-8000 can detect the ID markers manufactured by EEDENG technology, and is equipped with optional Android App and cloud storage to manage the identified data, so as to realize the visual management of underground pipelines.

Main Applications

Locate and identify various underground facilities, including but not limited to:

Ø  Pipeline path

Ø  Non metallic pipe

Ø  Various valves

Ø  Metering meter

Ø  Various crossing points

Ø  Tee

Ø  Depth change

Ø  Pressure reducing device

Ø  Cathodic protection

Ø  Pressure control point

Ø  Embedded reserved port

Ø  Various elbows

Ø  Pipe diameter change

Ø  Water well

Ø  Cover

Ø  Maintenance point

Product features                           

1. Used together with underground electronic marker to form an underground pipeline electronic identification system;

2. In the digital mode, the preset ID number in the marker can be read. Through the cloud database associated with the ID number, more information of underground facilities can be obtained, such as site image, buried date, construction personnel, category of underground facilities (valves, joints..), Material and size of underground facilities, etc.

3. The ED8000i can flexibly select RFID mode:

• No ID  mode: only detect the electromagnetic induction signal of underground electronic marker without RFID decoding. It has fast response speed and is compatible with underground electronic markers with the same frequency produced by different manufacturers, including ID or Non-ID markers;

• Automatic  mode: in the default working state, only the induction signal of underground electronic marker is detected without real-time RFID decoding. It has fast response speed and is compatible with underground electronic markers with the same frequency produced by different manufacturers, including ID or Non-ID markers. Decoding will not be performed until the depth button is pressed.

• RFID ON  mode: RFID decodes in real time and sends out prompt tone and signal strength information only when the ID marker is found. The response speed of the locator in this mode is slightly slower. Its advantage is that it can completely shield the influence of interference signal. As long as there is notification, it can confirm that the marker is found.

4. It has an optional android app. In the installation stage of underground electronic marker, there is no need to carry the detector host. Only any mobile phone with Android or Hongmeng OS can complete the input and upload of identification point information by scanning the bar code.

5. Support the special satellite positioning handheld terminal with Android OS, and achieve the centimeter level positioning accuracy of identification points.

6.  Support cloud storage of identification information.

7. Column antenna can support more accurate positioning.

Performance 

• Material: ABS

• Weight: 2.9kg ~3.3kg (According to different antenna sizes)

•  Dimensions (length * width * height):750 * 280 * 120 mm

•  Frequency (customizable):

· Power 169.8 kHz or 134Khz(EU)

· Water 145.7 kHz

· Sanitary 121.6 kHz

· Telecom 101.4 kHz

· Gas 83 kHz

· Cable TV 77 kHz

· General 66.35 kHz

•  Maximum detection depth (Slightly different at different frequencies and antenna configurations):

· Full range marker(YZ2400 ): 2.5~2.8m

· Middle range+ marker(ED2000):  2.2~2.4m

· Middle range marker (YZ1800 ):  >2.0m

· Ball Marker(ED1500): 1.4~1.6m

· Near surface marker(ED1100 ): 0.7~1.3m

•  Maximum ID reading depth (Slightly different at different frequencies and antenna configurations):

· Full range marker(YZ2400ID):   2.2~2.5m

· Middle range+ marker(ED2000ID): 1.8~2.2m

· Ball Marker(ED1500ID): 1.2~1.4m

· Near surface marker(ED1100ID): 0.7~1.2m

•  Accuracy of marker depth measurement: +/- 15% ±5cm

•  Waterproof capacity: IP54

  
  
  

UI

Ø Main UI of Locator

Ø  After connecting Android App through Bluetooth, all operating functions of the detector are taken over by app

   

ØBy querying the identification point through the map, you can select Google map to navigate to the selected identification point.